SPOILER ALERT!
IBMX3650M4 is IBM's new 2U server. The IBM server has been top other server brands to become the world's very first with higher stability and fantastic efficiency. But when we boot with IBM's most recent version 9.4 boot disk, the only option inside is wi
1. Begin the machine and see the following interface,
2. Wait a moment, see the picture beneath
three. Press F1 to enter the machine settings page, choose 'SystemSettings', and press Enter
4. Pick the very first option 'Adapters and UEFIDrivers'
5. Enter straight
six. Choose 'PciRoot (0x0) / Pci (0x2,0x2) / Pci (0x0,0x0)' and press Enter
7. Enter the quantity '1' and press Enter
8. Click 'start' to enter the webbios graphic settings web page
9. You may see you will discover eight difficult drives on the server, every single challenging drive is close to 600G, click 'ConfigurationWizard' on the left to enter the array setup wizard
Description:
ClearConfiguration (clear configuration): clear the existing configuration information and facts, spend focus to shed all data. NewConfiguration (new configuration): clear the existing configuration data, and produce a new configuration. AddConfiguration (add configuration): retain the original configuration information and facts, and add a brand new challenging drive to the original configuration. ( image data recovery does not trigger information loss, but this operation is risky, it really is advised to back up the data very first!) Note: Should you choose the very first two possibilities (ClearConfiguration and NewConfiguration), all information is going to be lost! Please backup all information initially! If it's a brand new machine, do not be concerned about this item.
10. Select 'NewConfiguration' right here and click 'next'
11. Click 'yes'
12. Direct 'next'
13. Click around the left side to pick the disk, and after that select AddToArray to add the selected really hard drives for the correct Drivegroups in order. Due to the raid5, I'll add all the left eight hard drives to the proper Drivegroups
14. Click 'AcceptDG' immediately after creation
15. Click 'yes'
16. Click 'AddtoSPAN' on the left
17. recover files from disk image . Choose RAID5 for the RAIDLevel around the left, the 'SelectSize' number is set as outlined by the number around the ideal, other default, click Accept
19. Click 'yes'
20. Mouse pick VD0 around the right and click 'next'
21. Click 'Accept'
22. Click 'yes'
23. Click 'yes'
24. Click 'Home'
25. Click 'Exit' on the left
26. Click 'yes'
27. Enter directly and enter the following picture to prepare to install the program
Here are the actions to set up centos, you are able to refer towards the specifics:
CentOS5.four complete installation graphic detailed tutorial
http://www.467.cn/shownews_598.html
Centos five.x version graphic installation guide and safety configuration
http://www.467.cn/shownews_568.html
LinuxCentOS6.0 graphic installation tutorial
http://www.467.cn/shownews_336.html
Summary: It can be mostly because the really hard disk of this machine is directly connected towards the riad card by SAS. Configure RIAD and you are OK. In case you only have one difficult disk, configure RIAD0, and configure RIAD1 for two.
Or should you have a robust hands-on capacity, you'll be able to open the case and connect the hard disk cable straight towards the motherboard. It's also doable not to pass the riad card.
If you are a rookie, it is possible to do absolutely nothing, there's a way, use IBM's boot disk, if there is no boot disk, go to the IBM official internet site to download, download the latest 9.four boot disk, after which guide each of the way, don't pick the method Choose, directly pick the riad configuration, configure the reboot, and then use the centos program disk to boot, anything is OK, however the boot disk is slower, wait for 10 minutes.
2. Wait a moment, see the picture beneath
three. Press F1 to enter the machine settings page, choose 'SystemSettings', and press Enter
4. Pick the very first option 'Adapters and UEFIDrivers'
5. Enter straight
six. Choose 'PciRoot (0x0) / Pci (0x2,0x2) / Pci (0x0,0x0)' and press Enter
7. Enter the quantity '1' and press Enter
8. Click 'start' to enter the webbios graphic settings web page
9. You may see you will discover eight difficult drives on the server, every single challenging drive is close to 600G, click 'ConfigurationWizard' on the left to enter the array setup wizard
Description:
ClearConfiguration (clear configuration): clear the existing configuration information and facts, spend focus to shed all data. NewConfiguration (new configuration): clear the existing configuration data, and produce a new configuration. AddConfiguration (add configuration): retain the original configuration information and facts, and add a brand new challenging drive to the original configuration. ( image data recovery does not trigger information loss, but this operation is risky, it really is advised to back up the data very first!) Note: Should you choose the very first two possibilities (ClearConfiguration and NewConfiguration), all information is going to be lost! Please backup all information initially! If it's a brand new machine, do not be concerned about this item.
10. Select 'NewConfiguration' right here and click 'next'
11. Click 'yes'
12. Direct 'next'
13. Click around the left side to pick the disk, and after that select AddToArray to add the selected really hard drives for the correct Drivegroups in order. Due to the raid5, I'll add all the left eight hard drives to the proper Drivegroups
14. Click 'AcceptDG' immediately after creation
15. Click 'yes'
16. Click 'AddtoSPAN' on the left
17. recover files from disk image . Choose RAID5 for the RAIDLevel around the left, the 'SelectSize' number is set as outlined by the number around the ideal, other default, click Accept
19. Click 'yes'
20. Mouse pick VD0 around the right and click 'next'
21. Click 'Accept'
22. Click 'yes'
23. Click 'yes'
24. Click 'Home'
25. Click 'Exit' on the left
26. Click 'yes'
27. Enter directly and enter the following picture to prepare to install the program
Here are the actions to set up centos, you are able to refer towards the specifics:
CentOS5.four complete installation graphic detailed tutorial
http://www.467.cn/shownews_598.html
Centos five.x version graphic installation guide and safety configuration
http://www.467.cn/shownews_568.html
LinuxCentOS6.0 graphic installation tutorial
http://www.467.cn/shownews_336.html
Summary: It can be mostly because the really hard disk of this machine is directly connected towards the riad card by SAS. Configure RIAD and you are OK. In case you only have one difficult disk, configure RIAD0, and configure RIAD1 for two.
Or should you have a robust hands-on capacity, you'll be able to open the case and connect the hard disk cable straight towards the motherboard. It's also doable not to pass the riad card.
If you are a rookie, it is possible to do absolutely nothing, there's a way, use IBM's boot disk, if there is no boot disk, go to the IBM official internet site to download, download the latest 9.four boot disk, after which guide each of the way, don't pick the method Choose, directly pick the riad configuration, configure the reboot, and then use the centos program disk to boot, anything is OK, however the boot disk is slower, wait for 10 minutes.
